Standards Packages
iTeh together with SIST has developed and compiled a comprehensive collection of standard packages to support your standard requirements. Our packages cover an array of content that includes quality management, risk management, road vehicles, machine safety, and much more. With over 200 packages to choose from, you are sure to find a collection to suit your standard needs.
Latest Standards
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62282-6-101:2024 covers micro fuel cell power systems and fuel cartridges that are wearable or easily carried by hand, providing direct current outputs that do not exceed 60 V DC and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-100. This document covers micro fuel cell power systems and fuel cartridges. This document establishes the requirements for micro fuel cell power systems and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and cargo and consumer transportation and storage of such items. . Fuel cartridges refilled by the manufacturer or by trained technicians are covered by this document. The fuel cartridges covered by this document are not intended to be refilled by the consumer.
This first edition, together with the other parts of the IEC 62282-6-1XX series, cancels and replaces IEC 62282-6-100:2010 and IEC 62282-6-100:2010/AMD1:2012. This edition includes the following significant technical changes with respect to IEC 62282‑6‑100:2010 and IEC 62282-6-100:2010/AMD1:2012:
a) A new structure has been set up: IEC 62282-6-101 covers the general safety requirements common to all fuel types whereas IEC 62282-6-102 and subsequent parts of the IEC 62282‑6-1XX series cover particular requirements for specific fuel types based on the requirements given in IEC 62282-6-101.
- Standard58 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft45 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an evaporative ageing procedure, applicable to test specimens of wood and wood-based products which are subsequently subjected to biological tests.
NOTE The method can also be used for pre-conditioning of untreated wood, modified wood and wood-based panel products, whether they received preservative treatment or not.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides guidelines and requirements for designing and conducting an evaluation of single-use adult incontinence absorbing products. It provides guidelines and requirements on creating data collection tools. In particular, it provides a framework for eliciting and recording the views of users and their carers on the acceptability of products. In addition, a product diary is described which can help to quantify some parameters of product use, such as wear times, the mass of urine absorbed by the product and the severity of any leakage from it.
This document does not cover direct comparison between products based on statistical parameters, neither does it provide guidelines on measuring the clinical efficacy of products; that is available in ISO 14155.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62282-6-106:2024 covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges using hydrogen produced from UN Class 8 (corrosive) borohydride formulations as fuel. These systems and units use proton exchange membrane (PEM) fuel cell technologies. The designs include fuel processing subsystems to derive hydrogen gas from the corrosive fuel formulation.
This first edition, together with the other parts of the IEC 62282-6-1XX series, cancels and replaces IEC 62282-6-100:2010 and IEC 62282-6-100:2010/AMD1:2012.This edition includes the following significant technical changes with respect to IEC 62282‑6‑100:2010 and IEC 62282-6-100:2010/AMD1:2012:
a) A new structure has been set up: IEC 62282-6-101 covers the general safety requirements common to all fuel types whereas IEC 62282-6-102 and subsequent parts of the IEC 62282-6-1XX series cover particular requirements for individual fuel types.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60676:2024 This document specifies the basic test procedures, conditions and methods for establishing the main performance parameters and the main operational characteristics of furnaces for direct arc heating, forming arcs between the electrode and metal, such as electric arc furnaces using alternating current (EAF AC) or direct current (EAF DC), and ladle furnaces (LF), with rated power level above 500 kVA .
This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The structure has been redrafted according to IEC 60398:2015.
b) The scope has been redrafted.
c) The terms/definitions, normative references and bibliography have been updated and completed.
d) The test methods and content from IEC 60398:2015 have been confirmed, replaced, or complemented with regards to direct arc furnaces (EAF, LF).
e) The annexes from IEC 60398:2015 have been confirmed, replaced, or complemented with regards to direct arc furnaces (EAF, LF).
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft34 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and the requirements for sulfamic acids and salts.
Similar to antiscalants as phosphonic acids and its salts (EN 15040) and polycarboxylates and its salts (EN 15039), sulfamic acid and its salts can be used alone or in combination with others drinking water substances as antifoulants (antiscalant effect) for membranes for the treatment of water intended for human consumption.
Sulfamic acid and salts are used in mixtures with sodium hydroxide and sodium hypochlorite or other drinking water chlorine based oxidizing agents as biofilm remover especially for reverse osmosis (RO) and nanofiltration membranes to prevent biofouling by microbiological contamination. The components will not pass the membrane and are rejected to the wastewater with the concentrate. For the other components EN standards are already exist.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft21 pagesEnglish languagesale 10% offe-Library read for1 day
- Corrigendum3 pagesEnglish languagesale 10% offe-Library read for1 day
Creating an amendment on European level to mirror the IEC interpretation sheet of IEC 60079-1:2014/ISH1:2020 which is still active at IEC.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 8362-2:2015 specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362‑1 and ISO 8362‑4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in ISO 8362-2:2015 are intended for single use only.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61189-2-720:2024 provides a method to evaluate specific characteristics of circuit boards by measuring the capacitance between conductor traces and a ground plane and can be used for qualitative comparison of a test specimen to a reference board. This method is not intended for quantitative measurements and for assessment of conformity to a specification.
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines data structures and basic operations on property graphs. It provides capabilities for creating, accessing, querying, maintaining, and controlling property graphs and the data they comprise. This document specifies the syntax and semantics of a data management language for specifying and modifying the structure of property graphs and collections thereof. This document provides a vehicle for portability of data definitions and manipulation among GQL-implementations. Implementations of this document can exist in environments that also support application programming languages, end-user query facilities, and various tools for database design, data administration, and performance optimization.
- Standard610 pagesEnglish languagesale 15% off
- Draft610 pagesEnglish languagesale 15% off
This document specifies technical requirements for hot rolled stainless steel plain bars and ribbed bars used as reinforcement in concrete. It is applicable to steel delivered in the form of bars, coils and de-coiled products. It does not apply to ribbed bars produced from finished products The production process is at the discretion of the manufacturer.
- Standard22 pagesEnglish languagesale 15% off
- Draft22 pagesEnglish languagesale 15% off
- Draft22 pagesEnglish languagesale 15% off
- Standard206 pagesEnglish languagesale 15% off
- Draft214 pagesEnglish languagesale 15% off
This document specifies a method to determine the amount of colour transferred from the surface of coloured leather to other surfaces by rubbing. Two tests are carried out, one with a dry rubbing cloth and one with a wet rubbing cloth. The method is applicable to all types of coloured leather. Since after‑treatments of the leather as well as surface finishes can affect the degree of colour transfer, the test can be made before and/or after such treatments.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
This document specifies a method of vertical impact testing on a filled paper sack by dropping. It is performed either as a single test to investigate the effects of vertical impact or as part of a sequence of tests designed to measure the ability of a sack to withstand a distribution system that includes a vertical impact hazard.
This document specifies the testing procedure and how the results of tests are presented. It is based on ISO 2248 but is specifically related to paper sacks.
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This document sets out terminology and use cases for data use, sharing and exchange. This document provides use cases detailing various types of data usage from both historical and hypothetical perspectives. This document is applicable to all types of organizations.
- Standard52 pagesEnglish languagesale 15% off
- Draft52 pagesEnglish languagesale 15% off
- Draft52 pagesEnglish languagesale 15% off
This document specifies minimum requirements for the training of scientific diving project leaders. This document specifies evaluation criteria for scientific diving project leaders. This document specifies the requirements under which training is provided, in addition to the general requirements for recreational diving service provision in accordance with ISO 24803.
- Standard9 pagesEnglish languagesale 15% off
- Draft9 pagesEnglish languagesale 15% off
- Draft9 pagesEnglish languagesale 15% off
1.1 This document specifies the safety requirements for lifting tables with the following characteristics:
- serving no more than 2 fixed landings but able to pass a fixed landing and,
- having a vertical travel speed of no more than 0,15 m/s, unless safe by position and,
- for raising or lowering goods (with or without operator(s) and/or authorized person(s)), or;
- for raising or lowering operator(s) and/or authorized person(s) with or without goods, to positions where they can carry out work from a fixed or movable lifting table that is guided throughout its vertical travel only (see Annex H).
1.2 This document specifies the appropriate technical measures for eliminating and reducing the risks arising from the significant hazards listed in Annex B.
1.3 This document does not apply to the following equipment:
- lifting tables with a vertical travel speed exceeding 0,15 m/s, unless safe by position;
- lifting tables, serving more than 2 fixed landings of a construction, for lifting goods, with a vertical travel speed not exceeding 0,15 m/s (EN 1570-2:2016);
- lifting tables, serving more than 2 fixed landings of a construction, for lifting operators, with a vertical travel speed not exceeding 0,15 m/s;
- lifting tables carrying operators and installed in full enclosures with a vertical travel speed not exceeding 0,15 m/s;
- lifting tables used on ships;
- lifting tables designed for artists and stage set features during artistic performances (EN 17206:2020);
- power operated lifting platforms for persons with impaired mobility (EN 81-41:2010);
- mobile lifting tables for airport ground support equipment (EN 1915-2:2001+A1:2009 and EN 12312-1:2013);
- mobile elevating work platforms (EN 280-1:2022);
- static Group B elevating work platforms (EN 280-1:2022);
- vehicle servicing lifts (EN 1493:2022);
- mobile lifting tables used for firefighting (EN 1777:2010);
- mobile lifting tables with a horizontal travelling speed of more than 1,6 m/s;
- rail dependent storage and retrieval equipment (EN 528:2021+A1:2022);
- scissor lift pallet trucks (EN ISO 3691-5:2015, including EN ISO 3691-5:2015/AC:2016 and EN ISO 3691-5:2015/A1:2020);
- lifting tables suspended from a ceiling.
1.4 This document does not consider the additional requirements for:
- electromagnetic compatibility;
- operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
- operation subject to special rules (e.g. potentially explosive atmospheres, mines);
- handling of loads, the nature of which could lead to dangerous situations (e.g. molten metal, acids, radiating materials, particularly brittle loads, loose loads (gravel, tubes));
- hazards occurring during construction, transportation, and disposal;
- equipment installed on the load platform or the replacing or maintaining of it;
- integration into broader systems or other machines, etc.;
- cable-less controls, i.e. wireless;
- lifting tables where the hydraulic pressure is derived directly from gas pressure;
- lifting tables powered by internal combustion engines.
- Draft87 pagesEnglish languagesale 10% offe-Library read for1 day
Benefits
Full Standards Solution
Our catalog includes not only latest standards but also full meta information about related standardization project lifecycle.
Cost Effective
Our PRICE MATCH GUARANTEE policy with multi-level volume discounts gives our clients the best option in the market. In addition, you can get access to the standards for 3, 10, or 30 days.
Stay Notified
Get alerted to the latest revisions and new standards in the Weekly Newsletter. Standards are constantly changing. Don’t miss a revision that can impact your business.
6 Reasons Why We are The BEST at What We Do
Compliance with international standards is increasingly becoming one of the key competitive advantages in the global market. Our company creates all conditions for the most comfortable implementation of new documents and norms in the processes carried out by your organization. Some of the key advantages of working with us are:
- Cost-effective - multi-level discounts and permanent updates of the functions give our clients the best option on the market.
- e-Library - access to standards for a period of time of your choice. It is a cost-effective solution for keeping updated with the newest standards.
- Company-wide documents - create a company account and connect all employees with access to purchased standards, e-Library documents, and packages.
- All in one spot - all purchased standards are kept in one place with controlled access by the account administrator.
- Client-centric - providing quality consulting is the prerogative and incentive to create new products that accompany your success and scale.
- 24 / 7 client support
We are dedicated to building mutually beneficial and long-term relationships with our clients. That is why our team focuses on creating services to help our customers develop and achieve new productive results.
About Us
iTeh Inc is a software development and IT consulting team of professionals who provide consulting, development and implementation of solutions for all types of businesses.
In cooperation, with the Slovenian Institute of Standardization (SIST), we create a unique solution that covers all aspects of the lifecycle of Standardization organizations. iTeh Standards is a part of the solution that helps SIST to provide and sell their products to Customers.
iTeh Standards Store is an evolving project, our goal is to build long-term relationships with our customers. We believe in delivering quality services to solve our customers' challenges and define success by exceeding our customers' expectations. We are always ready to listen and our experience allows us to provide our customers with helpful effective suggestions. You can contact us by email.
We are committed to providing the best possible experience for our customers.